GMC Terrain: Setting Adaptive Cruise Control / Disengaging ACC

There are three ways to disengage ACC:

  • Step lightly on the brake pedal.
  • Press GMC Terrain. Disengaging ACC.
  • Press GMC Terrain. Disengaging ACC.

    Do Not Use ACC on Hills and When Towing a Trailer

    Do not use ACC when driving on steep hills or when towing a trailer. ACC will not detect a vehicle in the lane while driving on steep hills. If the brakes are applied, ACC disengages...

    Erasing Speed Memory

    The ACC set speed is erased from memory if is pressed or if the ignition is turned off...

    Other information:

    GMC Terrain 2018-2023 Owners Manual: Driver Door Key Lock Cylinder Access (In Case of Dead Battery)


    To access the driver door key lock cylinder: Pull the door handle (1) to the open position and hold it open until cap removal is complete. Insert the key into the slot (3) on the bottom of the cap (2) and lift the key upward. Move the cap (2) rearward and remove. Use the key in the cylinder. To replace the cap: Pull the door handle (1) to the open position and hold it open ..

    GMC Terrain 2018-2023 Owners Manual: Malfunction Indicator Lamp (Check Engine Light)


    This light is part of the vehicle’s emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in Service Mode. See Ignition Positions. This light may also come on when the system has detected a problem with th..

    Copyright © 2023 www.gmcterrain2.com