GMC Terrain: Memory Seats / Manually Recalling Memory Positions
Press and hold 1, 2, or
to
recall
the previously saved memory
positions.
To stop Manual Memory Recall
movement, release 1, 2, or
or
press any of the following controls:
- Power seat
- Memory SET
- Power mirror, with the driver or
passenger side mirror selected
- Power steering wheel,
if equipped
Read these instructions completely
before saving memory positions.
To save preferred driving positions
1 and 2:
Turn the ignition on or to ACC/
ACCESSORY...
The vehicle identifies the number of
the current driver’s RKE transmitter
(1–8). See Remote Keyless Entry
(RKE) System Operation. If the
RKE transmitter is 1 or 2, and Seat
Entry Memory is programmed on in
vehicle personalization, the
positions saved to the same
memory button number 1 or 2 are
automatically recalled when the
ignition is turned on, or turned from off to ACC/ACCESSORY...
Other information:
If the vehicle requires an Emissions
Inspection/Maintenance test, the
test equipment will likely connect to
the vehicle's Data Link
Connector (DLC).
The DLC is under the instrument
panel to the left of the steering
wheel. Connecting devices that are
not used to perform an Emissions
Inspection/Maintenance test or to
service the vehicle may affect
vehicle operation...
To replace one of these bulbs:
Open the hood. See Hood.
Remove the bulb access cap
from the top of the headlamp
assembly by turning it
counterclockwise.
Remove the bulb from the bulb
socket by pinching the tabs on
either side of the bulb and pull
straight out...