GMC Terrain: Setting Adaptive Cruise Control / Accessory Installations and Vehicle Modifications
Do not install or place any object around the front camera windshield area that would obstruct the front camera view.
Do not install objects on top of the vehicle that overhang and obstruct the front camera, such as a canoe, kayak, or other items that can be transported on a roof rack system. See Roof Rack System.
Do not modify the hood, headlamps, or fog lamps, as this may limit the camera’s ability to detect an object.
Lighting Conditions Affecting ACC
The ACC front camera can be
affected by poor lighting conditions,
and ACC may have limited
performance when:
There are changes in brightness,
such as entering and exiting
tunnels, bridges, and
overpasses...
Cleaning the Sensing System
The camera sensor on the
windshield behind the rearview
mirror can become blocked by
snow, ice, dirt, mud, or debris. This
area needs to be cleaned for ACC
to operate properly...
Other information:
GMC Terrain 2018-2024 Owners Manual: Manually Recalling Memory Positions
Press and hold 1, 2, or to recall the previously saved memory positions. To stop Manual Memory Recall movement, release 1, 2, or or press any of the following controls: Power seat Memory SET Power mirror, with the driver or passenger side mirror selected Power steering wheel, if equipped ..
GMC Terrain 2018-2024 Owners Manual: Air Vents
Use the louvers located on the air vents to change the direction of the airflow. To open or close off the airflow: On the center air vents, move the slider knobs up or down. On the outer and rear air vents, move the slider knobs right or left. Operation Tips Clear away any ice, snow, or leaves from air inlets at the base of the windshield that could block the flow of air into t..
- Manuals Home
- 2nd Generation Terrain Owners Manual
- 2nd Generation Terrain Service Manual
- Instrument Panel Fuse Block
- Driver Mode Control
- Engine Heater
- New on site
- Most important about car
Categories
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing V. The messages that require immediate action cannot be cleared until that action is performed.
