GMC Terrain: Setting Cruise Control / Increasing Speed While Using Cruise Control

If the cruise control system is already activated:

  • Press and hold +RES on the steering wheel until the vehicle accelerates to the desired speed, then release it.
  • To increase the speed in small increments, briefly press +RES. For each press, the vehicle goes about 1 km/h (1 mph) faster.

The speedometer reading can be displayed in either English or metric units.

See Instrument Cluster (Base and Midlevel) or Instrument Cluster (Uplevel). The increment value used depends on the units displayed.

    Resuming a Set Speed

    If the cruise control is set at a desired speed and then the brakes are applied or is pressed, the cruise control is disengaged without erasing the set speed from memory...

    Reducing Speed While Using Cruise Control

    If the cruise control system is already activated: Press and hold –SET until the desired lower speed is reached, then release it. To slow down in small increments, briefly press –SET...

    Other information:

    GMC Terrain 2018-2021 Owners Manual: Raising the Seatback


    Warning If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. Warning A seat belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash...

    GMC Terrain 2018-2021 Owners Manual: Engine Compartment Fuse Block


    To remove the fuse block cover, squeeze the clips on the cover and lift it straight up. See Engine Compartment Overview. Caution Spilling liquid on any electrical component on the vehicle may damage it. Always keep the covers on any electrical component...

      Categories

      read more

       
    Copyright © 2021 www.gmcterrain2.com