GMC Terrain: Initial Drive Information / Heated and Ventilated Seats

If equipped, the buttons are on the
center console. To operate, the
engine must be running.
Press
or
, if equipped, to heat
the driver or passenger
seatback only.
Press
or
to heat the driver or
passenger cushion and seatback.
Press
or
, if equipped, to
ventilate the driver or passenger
seat. A ventilated seat has a fan
that pulls air through the cushion
and seatback. The air is not cooled.
Press the heated or ventilated
button once for the highest setting.
With each press of the button, the
heated or ventilated seat will
change to the next lower setting,
and then to the off setting. The
lights indicate three for the highest
setting and one for the lowest.
See Heated and Ventilated Front
Seats.
If equipped, memory seats allow two
drivers to save and recall their
unique seat positions for driving the
vehicle, and a shared exit position
for getting out of the vehicle...
Head Restraint Adjustment
Do not drive until the head restraints
for all occupants are installed and
adjusted properly.
To achieve a comfortable seating
position, change the seatback
recline angle as little as necessary
while keeping the seat and the head
restraint height in the proper
position...
Other information:
Lamp Assembly
Bulb Assembly
Bulb Socket
Bulb
Lamp Assembly
To replace one of these bulbs:
Open the liftgate partway. See
Liftgate.
Push the lamp assembly
outboard to remove.
Pull the lamp assembly down
to remove it from the liftgate.
Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3)...
Removing the Spare Tire and Tools
Tow Eye (If Equipped)
Capless Funnel Adapter (If
Equipped)
Wheel Wrench
Strap
Jack
Screwdriver (If Equipped)
To access the spare tire and tools:
Open the liftgate. See Liftgate.
Fold the rear part of the load
floor to the front, pull it
rearward to disengage the
clips, then pull upward to
remove it...