GMC Terrain: Warning Lights, Gauges, and Indicators / Low Fuel Warning Light
For the base level cluster, this light comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced.
For the uplevel cluster, this light is near the fuel gauge and comes on briefly when the ignition is turned on as a check to show it is working.
It also comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced.
Engine Oil Pressure Light
Caution
Lack of proper engine oil
maintenance can damage the
engine. Driving with the engine oil
low can also damage the engine.
The repairs would not be covered
by the vehicle warranty...
Diesel Exhaust Fluid (DEF) Warning Light
This light, a Driver Information
Center (DIC) Message, and a chime
come on when there is an issue with
the DEF.
If the DEF issue has not been
corrected, the light will continue to
flash...
Other information:
GMC Terrain 2018-2026 Owners Manual: License Plate Lamp
Lamp Assembly Bulb Assembly Bulb Socket Bulb Lamp Assembly To replace one of these bulbs: Open the liftgate partway. See Liftgate. Push the lamp assembly outboard to remove. Pull the lamp assembly down to remove it from the liftgate. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3)...
GMC Terrain 2018-2026 Owners Manual: Door Locks
Warning Unlocked doors can be dangerous. Passengers, especially children, can easily open the doors and fall out of a moving vehicle. The doors can be unlocked and opened while the vehicle is moving. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked...
- Manuals Home
- 2nd Generation Terrain Owners Manual
- 2nd Generation Terrain Service Manual
- Power Outlets
- Folding Mirrors and Heated Mirrors
- Driver Mode Control
- New on site
- Most important about car
Categories
Vehicle Messages
Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may appear one after another.
The messages that do not require immediate action can be acknowledged and cleared by pressing V. The messages that require immediate action cannot be cleared until that action is performed.
