GMC Terrain: Memory Seats / Identifying Driver Number
To identify the driver number:
- Start the vehicle with a different
key or RKE transmitter. The
DIC should display the driver
number; 1 or 2. Turn the
ignition off and remove the key
or RKE transmitter from the
vehicle.
- Start the vehicle with the initial
key or RKE transmitter. The
DIC should display the other
driver number not shown in
Step 1.
To have the Seat Entry Memory
movement begin when the
vehicle is started, select the
Settings menu, then Vehicle,
then Seating Position, and then
Seat Entry Memory...
Read these instructions completely
before saving memory positions.
To save preferred driving positions
1 and 2:
Turn the ignition on or to ACC/
ACCESSORY...
Other information:
If the vehicle's seat belt will fasten
around you, you should use it.
But if a seat belt is not long enough,
your dealer will order you an
extender. When you go in to order it,
take the heaviest coat you will wear,
so the extender will be long enough
for you...
Warning
If temperature change or pain to
the skin cannot be felt, the seat
heater may cause burns. See the
Warning under Heated and
Ventilated Front Seats.
If equipped, the rear heated seat
buttons are on the rear of the center
console.
Press to heat the left or right
outboard seat cushion and
seatback...